They stole an ATM and activated the dye system — but that is not the only trap awaiting robbers
![]()
They stole an ATM, activating a system that ruined the money with dye — but that is not the only trap awaiting robbers. This, too, is the everyday reality of today. Banks protect themselves as best they can.

During an ATM theft in the early hours of the morning, a protective mechanism activated and ruined the banknotes inside the stolen ATM with red ink.
Tatra banka, which owned the ATM, therefore drew attention to its deployment in Slovakia of new technology protecting ATMs against increasingly frequent thefts.
The protective mechanism activates if someone gains unauthorised access to the ATM or moves it. According to the bank, the thieves were probably also marked with dye.
In the press release reporting the successful activation of the protective mechanism, the bank also describes other protective systems it deploys in ATMs to prevent skimming — the unauthorised copying of a card.
The ATMs are protected by an anti-skimming kit from TMD and a SurFace Detection Kit.
The anti-skimming kit uses a jammer to prevent an unauthorised reader fitted to the ATM from reading a card’s magnetic stripe, while also disrupting wireless transmissions from any camera added by thieves. The SurFace Detection Kit detects the presence of an unauthorised reading device.
We also know of another recent method which does not protect the ATM itself, but allows the police to find it within minutes. A small battery-powered transmitter with a GPS receiver, operating in the VHF band, is placed inside the ATM. This device also activates when the ATM is moved. Anyone who knows the frequency and has equipment to detect and locate the signal can establish where the ATM is within minutes.
But the bandits are keeping up with the times too, and can buy RF signal detectors in specialist shops despite their high price. Only time — or the insurers covering the ATMs, who will no longer want to keep paying out — will tell what further protection will be activated. Perhaps in a few years, bandits will drive large luxury SUVs with chains and go on raids carrying large bags full of special equipment and jammers. Their predecessors less than a century ago needed only a few crowbars and courage.
As we found out further, the best spectrum scanner for searching is the AOR SR 2000 receiver with a spectrum analyser, which probably only Market.sk keeps permanently in stock, in its online shop. The scanner’s LCD screen can display a complete overview of what is happening in the frequency band.
A receiver combined with an FFT spectrum analyser with a colour 5-inch LCD screen, covering 25–3000 MHz. A high-end, fast scanner-receiver for rapid examination of the radio spectrum. High sensitivity and intercept point, adjustable attenuator, preamplifier and bandwidth, with an LCD display span of up to 10 MHz. High-quality monitoring audio, a fast display refresh rate, and selectable display and operating modes. A Slovak manual is available.
New-generation ATMs
Because first-generation ATMs in the 1960s had no online access to information about the account balance of a client and operated offline, banks were very cautious about selecting customers. Initially, the machines served only customers of the branch where they held a current or cheque account.
Initially, ATMs had no screen, and punched cards were used to identify customers. The ATM retained the card after a transaction, and customers received it by post, usually with their monthly account statement. Customers liked this system for its simplicity.
About 80% of ATMs were manufactured by Docutel. In the following decade, however, the company lost its market leadership, which was shared by Diebold, NCR
and IBM. The reasons cited for its loss of leadership include its persistent attempt to promote its own magnetic-stripe solution — four tracks separated by gaps — against the American Bankers Association standard of three tracks in a single stripe, as well as weak marketing and the high failure rate of its ATMs.

The number of ATMs grew gradually. In 1971, about 35 American banks were using the first types of ATM (Wells Fargo, for example, ordered an astonishing 100 machines at the time). By 1975, more than 5,000 were operating worldwide, including over 3,140 at 534 American banks. Two years later, the number of ATMs in the USA had almost doubled to 6,000, and in 1981 it exceeded 20,000. Citibank became the largest ATM operator in the United States in the late 1970s, with a network of more than 400 machines in 1979. In 2001, BankOne held the leading position with 12,000 ATMs, followed by American Express (8,700) and Wells Fargo Bank.
Similar gradual growth in the number of ATMs could also be seen in the United Kingdom and other countries. Individual bank networks later merged into larger national and ultimately international systems. Fraudsters soon discovered the low level of security of the first ATMs and began producing counterfeit punched cards on a large scale.
ATM cards with magnetic stripes gradually began to be used from 1971, quickly replacing punched cards. The second generation of ATMs arrived in the late 1970s, offering lower operating costs and more secure technologies. Personal identification numbers (PINs) were introduced to verify customers’ identities. Cryptographic methods, developed with the involvement of specialists from the British Army and MI5, were used to record data on the magnetic stripe — the limit, reduced by transactions, the PIN and other details. Transaction data began to be transmitted electronically to headquarters.
In 1972, Lloyds Bank introduced the first online ATMs in the United Kingdom, called Cash-Point. Developed by IBM, they used plastic cards with magnetic stripes and already allowed online authorisation through the bank’s accounting system. A year later, Fujitsu introduced this technology in Japan. From the mid-1970s, banks installed only new-generation ATMs, replacing the original first-generation offline machines by the end of the decade. Some banks kept their ATMs permanently connected online to a central information system; others operated them offline and connected several times a day to transfer transaction and account-balance data. Some banks connected them only once a day or updated account-balance information in the ATMs using floppy disks.
Improvements in ATM operation marked the beginning of their mass deployment. In 1972, Citibank became the first bank to introduce ATMs on a large scale. Further inventions supported their development. For example, in 1979, IBM developed the DES (Data Encrypting Standard) encryption algorithm. A year later, this algorithm began to be used to encrypt and decrypt personal PIN codes.
Integrating ATMs into retail banks’ business strategies reduced operating costs by effectively replacing tellers’ work and saving the space needed for teller counters and their support facilities in branches. This allowed more customers to be served at lower cost and helped reduce the number and size of bank branches. American Express introduced its own ATMs in 1977, dispensing travellers’ cheques to its cardholders.
As the ATM market began to develop, the American company Diebold decided to enter it. As early as 1967, it demonstrated at an American Bankers Association conference a concept for a universal ATM with both withdrawal and deposit functions, building on its existing bank-teller systems with pneumatic cash dispensing. To enter the growing market quickly, the company decided to reach an agreement with a Japanese ATM manufacturer.
It offered the Money Dispenser MD 400, later nicknamed Mad Dog because of its unpredictability. Banknotes were attached to clips, and the ATM accepted cards with the withdrawal amount and PIN recorded on them. During a transaction, the ATM retained the card, and the customer could collect it at the branch the next day for reuse. This solution was impractical and could not compete with Docutel’s ATMs. Diebold therefore decided to take two steps:
1. It stopped selling this type of ATM.
2. It told customers that it would buy back the supplied ATMs against an order for a new range of machines.
In October 1973, Diebold offered banks the TABS 500 ATM (Total Automated Nankiny System), the first to have a programmable screen, allow cash deposits and operate offline. By the end of 1974, all first-generation MD 400 ATMs had been replaced by this new model, and Diebold has since been the largest ATM supplier in North America.
Because of the complexity of the technology, only about ten companies manufacture ATMs today. Europe’s largest ATM suppliers are NCR, Diebold and Wincor-Nixdorf, which together control around 80% of the market. ATMs crossed national borders in 1983, when VISA established the first international network, followed a year later by Eurocheque.
The third generation of ATMs had already arrived by the mid-1980s, and the fourth generation followed in the late 1980s, beginning to take advantage of personal computers. Today, we are witnessing the introduction of a fifth generation of cash machines using internet technologies — so-called web-enabled ATMs. These can, for example, dispense postage stamps, admission tickets and travel tickets, show sports results, or display advertising managed through a CRM (Customer Relationship Management) system.
Operating the first ATMs was no simple matter, and initially brought bank staff many problems and sleepless nights. Banknotes jammed in the feeding mechanism, and customers often did not get their cards back; in many cases, tellers had to retrieve them from the reading device. Veterans recall a number of stories that are amusing today.
The ceremonial opening of the first ATM in the USA, at a Chemical Bank branch in New York, went smoothly. Shortly afterwards, however, a torrential downpour began. When Docutel technician Tom Garret returned to the bank after driving his bosses to the airport, he found Chemical Bank project manager Don Piercy in the small room behind the ATM with his sleeves rolled up. Beside him was a bucket with rags he was using to wipe up water flowing out of the machine. Tom could manage only a brief comment: “It never rained that hard in our laboratory.”
This experience led to a design change in ATMs. From then on, the reading device and cash-dispensing mechanism were positioned horizontally so that water could run harmlessly down the machine.
Another story concerns the commissioning of an ATM in Corpus Christi, Texas. The largest local bank organised a ceremony attended by the public, press and television. The bank president ceremoniously inserted his card into the reader. “The ATM swallowed the card,” recalled Bob Heckman, Docutel’s former vice-president of sales and marketing, “made a few unusual noises, and promptly returned it crumpled and torn.” As the bank’s chief stared in astonishment, the master of ceremonies remarked: “Well, I think there are still a few bugs to iron out.”
Technicians at a bank in Seattle took their “revenge” for the problems of operating first-generation ATMs when the last 200 Docutel machines were removed in 1984. For all the trouble caused by night-time callouts, jammed envelopes of banknotes, ironing notes to stop them sticking in the feed mechanism after the envelope method was abandoned, and searching for lost cards inside the machines, each technician at a special party was given the chance to smash with a hammer the component that had caused them the most grief.











