Ventilating a flat with plastic windows: an expert’s view on the issue

Loading

Contents

The purpose of plastic windows is to enable consumers to use a single frame instead of two, thereby making glazing more cost-effective. Plastic is airtight, attractive and low-maintenance. But there are two sides to every coin. Once the timber frames have been removed, additional ventilation is required in a flat with plastic windows. Otherwise, building structures and furniture will be damaged by condensation. Air conditioning or an air purifier cannot solve the problem.

What happens in a flat with double-glazed plastic windows

Most flats here are ventilated naturally. Air is drawn in through gaps in the window frames and door frames. Exhaust air is drawn out through ventilation openings in kitchens, bathrooms and toilets. This type of ventilation is sufficient provided the flat has wooden doors and the integrity of the ducts is not compromised.

Animal repellent with a loudspeaker and control unit
Repellents (or deterrents) are chemical substances, mixtures, or electronic and mechanical devices designed to repel or deter unwanted animals, insects and other pests, or prevent their access to a defined area. Their main purpose is to protect human dwellings, gardens, crops or property in a humane way, without the need to kill or injure the animal. They work by creating unpleasant stimuli that prompt pests to leave the protected area voluntarily.

Once PVC windows have been fitted, changes are essential even with a well-functioning ventilation system. Once the airflow has stopped, the duct in the kitchen or bathroom changes from an exhaust duct to a supply duct. The rooms become filled with unpleasant odours from neighbours, and humidity levels rise, which contributes to the growth of bacteria and the formation of mould.

Homeowners are obliged to provide fresh air or other ventilation systems.

Ventilation valve

The design of the supply units allows for the creation of a duct to allow air to flow from the street into the room. Due to the narrow duct of such a unit, the temperature conditions in the room remain virtually unchanged when it comes to cooling the room. In this case, air circulation takes place continuously, provided that the extract ventilation is properly organised.

There are power supply mechanisms that can be fitted directly to a frame made from a plastic profile, and there are wall-mounted units. In the former case, the simpler design allows you to fit the unit yourself relatively quickly. Valves designed for installation within the load-bearing part of the structure require a channel to be cut through the entire thickness, which is not always possible without specialised equipment.

What are the ventilation functions in a flat with plastic windows?

In rooms with a timber structure, fans can be fitted into the exhaust ducts to improve ventilation efficiency. In winter, there was no need to switch them on at all due to the temperature difference.

Fitting plastic windows radically changes the situation. Over time, the air inside your home can become more toxic than the air outside.

Tenants have four simple solutions:

  • regular ventilation;
  • installation of electric fans in mines;
  • installation of micro-ventilation equipment;
  • installation of supply valves;
  • installation of compact fans.

One advantage of ventilation is that it allows oxygen to enter the premises. However, in the city, this is accompanied by dust, noise and exhaust fumes. This means that this method is only a short-term solution and is ineffective.

Electric fans are suitable for kitchens and bathrooms. They are installed in waste shafts and can be switched on manually or automatically (when humidity rises or air quality deteriorates). These devices are available from many manufacturers at various prices.

Advertisements

Micro-ventilation involves de-pressurising plastic structures by installing equipment that allows air from outside to enter the premises. In practice, this involves creating openings and installing equipment within them, the cost of which depends on the manufacturer and the configuration.

Intake valves can be installed in an external wall, at the junction between the window and the wall, within a profile, or beneath the window sill. These are plastic pipes through which a flow of air from outside passes. The market offers models with various flow rates, which can be controlled manually or automatically. It is best to consult a specialist to calculate the number and positioning of the valves. A fan in the shaft is required to increase the efficiency of the supply unit.

Another option is an extractor fan, which expels a stream of stale air. It is suitable for the kitchen and can be operated continuously or as and when required. A non-return valve prevents air from entering from outside. Higher-end models are fitted with sensors that switch the fan on when a certain level of pollution is detected. For bathrooms and toilets, there are waterproof models designed for installation in external walls.

How can you solve the problem of ventilation in your home?

The simplest option is to open the windows regularly … However, if you have children, it is unlikely that draughts would do them any good. Moreover, getting up to open a window every hour is simply illogical and time-consuming. A more economical option is to solve the problem of air circulation in your flat by installing windows with additional features. This could involve fitting a window (you choose the size yourself), a ventilation valve or a ridge vent.

The latter device is simply essential, and not just for micro-ventilation. Securing the window frame helps to protect the window from gusts of wind. Some might say that any old object will do for such a minor detail, but believe me, it won’t perform its intended function properly. If your window was supplied without this lock, you can easily rectify the situation by ordering one separately. This inexpensive item will become your reliable helper.

A traditional window also has its advantages. Cold air does not enter the flat, but is mixed with the warm air currents above and only then is it distributed evenly throughout the living space. The disadvantage is the cost of the window itself.

Air vent valve

Let’s now move on to the vent valve … Previously installed windows do not have this feature, but you can now order this type of ventilation system right from the outset. And if you wish, these ventilation units can be fitted into all window models. This design operates independently and does not require any additional energy consumption. The system blocks strong gusts of wind whilst ensuring a constant exchange of air through micro-openings. You don’t need to open the window, so you don’t have to remember to close it again; and if you do forget, you won’t have to worry about intruders getting into the room whilst you’re at work. The self-ventilating system regulates airflow, eliminates sudden temperature fluctuations and frost build-up in winter, and reduces wear and tear on the window’s moving parts.

By installing this type of air conditioning on plastic windows, you will not only ensure a quiet home, but also eliminate stagnant air.

The vent valve allows you to permanently free yourself from an open window. It consists of two parts. A small seal is cut out on both sides at the bottom of the frame. A flat insert is attached to the resulting opening. This creates a gap designed to allow air to enter the space between the sash and the frame and then rise. At the top, the frame is fitted with special devices featuring openings for airflow. When the windows are closed, the ventilation system evenly extracts air from the room. If the air pressure inside the flat differs from that outside, the mechanism opens, allowing air to enter the room slightly. Thus, there is a constant exchange of air in the room… Installation is quick, affordable and straightforward. The window’s appearance is not affected. There are no restrictions on opening the window or fitting a mosquito net. Furthermore, the ventilation valve is installed in accordance with all building and fitting standards, and the process takes approximately ten minutes per window.

Valves are improving. You can choose a valve that allows you to manually regulate the volume of air drawn in using special shut-off flaps. You can select the optimal operating sequence for the valve and, if necessary, close it completely.

Nowadays, various types of ventilation valves can solve many of the problems associated with ventilating plastic windows and restoring air exchange in a room, but it is important to bear in mind that ‘a lot’ is not everything.

Advertisements

Natural ventilation, achieved by fitting ventilation valves to plastic windows, compensates for the airtightness of the room provided by modern window design.

Parameters and composition of forced ventilation

The best option is a split system for the whole flat, installed on the balcony, in a cupboard or in the hallway. When installing the system, you should take into account the need for maintenance and repairs. The unit can be installed in a wall, under the ceiling or on the floor. Air from outside is supplied via a manifold connected to the room by air ducts installed in the suspended ceiling. Exhaust air is extracted from the bathroom, toilet or kitchen. Once connected to the mains supply, this type of forced ventilation in a flat with plastic windows operates automatically all year round.

Before the design is drawn up, the dew point and air exchange rate are calculated in accordance with SNiP requirements. If the design is drawn up correctly, the balance is restored to prevent condensation from forming.

The system may consist of:

  • systems for forced inflow and natural outflow;
  • equipment for electric fans with forced air intake and exhaust;
  • supply and exhaust system with a heat recovery unit;
  • inlet valves and covers.

The equipment is selected based on the characteristics of the specific flat, the customer’s preferences and financial circumstances. First, the dew point and air exchange rate in each room are calculated. The equipment (supply valves with filtration and heating, electric fans) is then selected and a plan for the ductwork layout is drawn up.

Such a system is easy to set up, fully delivers the required air parameters and is virtually unaffected by external factors.

Plastic windows

These models do not require any insulation at all, as, when installed correctly, they completely eliminate the possibility of gaps or leaks. In almost all modern window types, ventilation openings are replaced by special adjustable slits. These allow the necessary amount of fresh air to be brought into the flat.

Ventilation is provided in the flat during freezing weather at their own expense. This air inlet is designed so that cold air coming in from the street is directed downwards and, by mixing with the warm air from the radiator, is distributed evenly.

I need to ventilate my timber-framed house further

A timber-frame house has high airtightness if it is built using modern technologies. Natural ventilation works well only in winter, but it lowers indoor temperatures. A forced ventilation system is required for year-round habitation. Its design is no different from those installed in flats.

The type of system depends on the size and characteristics of the house. The most economical option is natural airflow and forced drainage. However, this type of ventilation lowers the indoor temperature. It is therefore better to install a more expensive system that maintains the set temperature and humidity levels.

None of the above applies to a house or country cottage in which they live on a regular basis. In summer, ventilation is provided by natural draughts.

Ventilation regulations for flats

As air exchange has a direct impact on quality of life, scientific research has been carried out to determine its optimal parameters, the results of which are reflected in regulatory provisions.

The main document governing the rules for the organisation of ventilation in residential premises is SP 54.13330.2016 ‘Residential Multi-flat Buildings’, an updated edition of SNiP 31-01-2003.

Rules for calculating the minimum air change rate

The minimum air volume for different types of rooms can be calculated using the data in Table 9.1 of SP 54.13330.2016.

When carrying out the calculation, you cannot simply add the figures together. For living areas, air exchange refers to the flow of air from outside into the kitchen, bathroom and so on, whilst for service areas, it refers to the inflow from the living areas and the outflow outside the flat.

It is therefore necessary to calculate the required inlet and outlet flow rates separately, so that the maximum of these two values is taken as the result.

There is one caveat. The designer of a residential block is required to calculate the supply air flow rate for the heat balance calculation and the extract air flow rate for the calculation of the ventilation unit parameters.

Flats residents have the right to opt for ventilation with a lower air flow rate at their own discretion, which is what happens in the vast majority of cases.

It is only possible to determine the air change rate independently and with a good degree of accuracy when using forced ventilation.

We have covered a detailed calculation of ventilation, including formulas and real-life examples of calculations for specific spaces, in another article.

With natural air circulation, you must pay attention to the following indicators:

  • excessive humidity in the air (which can be measured with a hygrometer) – indicated by the presence of mould on the walls and ceiling, as well as by window panes misting up in winter;
  • a lack of oxygen or an excess of carbon dioxide (which can be measured using a gas analyser) – this manifests as breathing difficulties for everyone in the flat.

How to ventilate a flat with plastic windows

Method one: open the window the old-fashioned way

Open a window sash – fresh air from the street flows into the room. If you’ve thought about ventilation in advance, you’ll have fitted at least one sash on each window with a tilt mechanism.

It is often not possible to ventilate a room through a window that is wide open – only on lovely summer days. Most often, the window sash is opened slightly and secured in the chosen position. There are various ways of doing this.

The simplest solution is to fit a comb-like restrictor. The open sash is secured in one of four positions.

If you wish to leave a very small air gap, you can fit the window with special fittings for slotted ventilation (micro-ventilation). A special component is fitted to the window frame:

Thanks to this feature, when the window handle is turned 45° upwards from the ‘open’ position, the sash opens by a few millimetres and locks into this position, which is very convenient.

And by the way. In winter, for ventilation purposes, it’s better to open a window wide for a few minutes than to leave it ajar. In two or three minutes, the room will be well ventilated through the open window, but it won’t have time to cool down.

Everything would be lovely and simple, but the noise from the street, the dust, the clumps of poplar fluff and the mosquitoes find their way into the room through the open window. Fortunately, there is a better solution.

Method two: a micro-ventilation device in the window frame

This device maintains air exchange between the room and the outside when the window sashes are fully closed. The built-in filter traps dust and insects. The airflow rate is adjustable. You can ventilate the room even in winter without worrying about it getting too cold.

It is advisable to order windows fitted with micro-ventilation systems straight away. However, these can also be retrofitted to windows that have already been installed. Call your nearest VEKA partner company – their advisers will tell you how it’s done and how much it will cost.

Method three: ventilation is to blame for everything

As your flat already has an extract ventilation system, you need to install a supply ventilation system as well.

Properly fitted and functioning supply and extract ventilation systems ensure that the flat is ventilated without the need to open windows. Of course, the cost of such a technical solution is much higher. Moreover, general ventilation does not always work as it should.

It seems that the best option is to fit the window with a micro-ventilation system. Take a closer look at it!

Advertisements
AliExpress

Leave a Reply

Your email address will not be published. Required fields are marked *