Wireless Microphones
![]()
To eliminate the need for different types of wiring, a wireless VHF transmitter can be connected to the microphone. Its use nevertheless requires careful preparation and finding the right place to position the microphone. Miniature radio transmitters, known as bugs, are used for short-term monitoring of a room. They are now very small, inexpensive to obtain, and quick and easy to install. The conversation can be received on ordinary radio receivers at distances of about 100 m, so tuning outside the VHF range is recommended. Bands from 200 MHz to 400 MHz are generally used, and listening is possible with an ordinary wideband receiver connected to headphones or a recording device. An excellent, discreet solution is to use the 110 MHz to 130 MHz band, just above the VHF frequency range. A pocket radio receiver with headphones and a modified reception range serves as the receiver. An MP3 player with a radio receiver that can record the broadcast conversation to its internal memory is suitable. This is a great solution because a person wearing headphones and carrying an MP3 player attracts no attention and looks inconspicuous.

The propagation properties of radio waves vary with transmitter frequency. Frequencies from 60 MHz to 450 MHz have been proven in practice to be the most suitable, providing good signal transmission quality and readily penetrating building walls. Lower frequencies require longer antennas, which are very impractical for this purpose. Frequencies above 300 MHz penetrate building walls poorly because they are absorbed and reflected. However, this band is divided into further bands allocated to other users. The 60 MHz to 73 MHz and 88 MHz to 108 MHz bands are used for commercial radio broadcasting, while 77 MHz to 88 MHz is reserved for the ambulance service. There is considerable interference in the 433 MHz band from various remote controls and data links.
Modulation
Signal transmission and its quality are also affected by the modulation method. The basic types are amplitude modulation (AM) and frequency modulation (FM). AM is used in the long-, medium- and short-wave bands; FM is used in the VHF bands and in amateur bands for citizens’ band radios. Miniature eavesdropping transmitters mainly use frequency modulation with the transmission bandwidth narrowed to 12.5 MHz and 25 MHz — narrow-band frequency modulation (FMN, with N from the English word “narrow”). It ensures good intelligibility and sound for the monitored conversation.
Transmitter Range and Power
Transmitter range varies and depends on its power and power supply. Transmitting power also affects battery life. Eavesdropping transmitters operate at different powers, from 1 mW to 250 mW; 1 mW gives a range of about 10 metres. Higher power improves range but also increases the risk of detection. The most commonly used powers are between 20 mW and 100 mW. For example, a 20 mW transmitter with a 9 V battery can operate for up to 10 hours over a distance of 200 to 300 metres.
Positioning Wireless Microphones
The positioning and use of wireless microphones are very important. Placement options are almost unlimited: microphones are installed in electrical equipment, pictures, walls and furniture, and can also be placed in almost any object in the area of interest, such as a vase, ashtray, calculator, fountain pen or cigarettes. Wireless microphones concealed on a person’s body or in clothing are called personal transmitters. Examples include a clock, where the listening device can be powered by batteries or directly from the mains; a flowerpot; or a waste bin. A particularly discreet location is inside a smoke detector, powered directly from the fire alarm system (EPS), or a mains-powered bug in a socket, splitter or extension lead, where its operating life is practically unlimited.
VOX System
Small eavesdropping microphones also have disadvantages because they transmit continuously. This not only drains their power source, but also allows their signal to be picked up by a wideband communications receiver. There are several ways to address this: using a special type of modulation, reducing transmitter power, limiting transmission time or using remote control. More expensive wireless microphones have a VOX system which automatically starts the transmitter when a preset acoustic pressure level is reached in the area of interest. This is advantageous for long-term monitoring: it requires no continuous operation, reduces the possibility of accidental interception of the radio transmission and extends battery life.










